This is an old revision of the document!
Looking Glass
Diagnostic probe
Nodes
Node | admin-c | Location | Connectivity | Router model | VPN Endpoint |
lux | bcollet | Luxembourg, LU | GigabitEthernet | Juniper SRX220 | IPSec | 185.4.124.143 |
Originated prefixes
Peerings
local-router | remote-router | remote-as | Method |
ams | 192.168.208.241 | AS64543 | 192.168.208.240 | 64543 | OpenVPN |
192.168.42.80 | AS64544 | 192.168.42.81 | 64544 | IPSec IPv4 |
2a06:e881:1100:180::1 | 2a06:e881:1100:180::2 |
192.168.42.86 | AS64545 | 192.168.42.87 | 64545 | IPSec IPv4 |
2a06:e881:1100:181::1 | 2a06:e881:1100:181::2 |
192.168.42.93 | AS201281 | 192.168.42.94 | 64546 | 1000Base-T |
2a06:e881:1100:182::1 | 2a06:e881:1100:182::2 |
Extended BGP communities
Refer to your router documentation to configure extended communities.
Juniper example: target:202945L:70
Sub-Type | ASN | Value | Description |
Ingress |
Route Target | 202945 | 70 | Sets local preference value within AS202945 to 70 . |
80 | Sets local preference value within AS202945 to 80 . |
90 | Sets local preference value within AS202945 to 90 . |
Egress |
Route Origin | 202945 | 1000 | Set on routes learned from transit providers. |
1001 | Set on locally originated GLaNET anycast routes. |
1002 | Set on routes learned from GLaNET peers. |
1003 | Set on locally originated routes. |
1004 | Set on locally originated anycast routes. |
1005 | Set on routes learned from non-GLaNET peers. |
Various