This is an old revision of the document!

AS 202945 - AltNet (formerly AS 64542)

Contact

Node	admin-c	Location	Connectivity	Router model	VPN Endpoint
`lux`	bcollet	Luxembourg, LU	GigabitEthernet	Juniper SRX300	IPSec	185.4.124.143

Prefix	Status	admin-c	Comments
IPv4
192.168.40.0/22	Active	bcollet
192.168.248.53/32	Active	dnsmaster	GLaNET anycast DNS
192.168.248.153/32	Active	dnsmaster	GLaNET anycast recursive DNS
185.4.124.216/29	Active	`ALTN-RIPE`
IPv6
`2a06:e881:1100::/44`	Active	`ALTN-RIPE`
`fd00:6b64:f3b0::53/128`	Active	dnsmaster	GLaNET anycast DNS
`fd00:6b64:f3b0::153/128`	Active	dnsmaster	GLaNET anycast recursive DNS

local-router		remote-router		remote-as	Method
`lux`	192.168.18.65	`AS64543`	192.168.18.64	64543	IPSec IPv4
	192.168.42.80	`AS64544`	192.168.42.81	64544
	`2a06:e881:1100:180::1`	`AS64544`	`2a06:e881:1100:180::2`	64544
	192.168.42.86	`AS64545`	192.168.42.87	64545
	`2a06:e881:1100:181::1`	`AS64545`	`2a06:e881:1100:181::2`	64545
	192.168.42.93	`AS201281`	192.168.42.94	201281	1000Base-T
	`2a06:e881:1100:182::1`	`AS201281`	`2a06:e881:1100:182::2`	201281	1000Base-T

Refer to your router documentation to configure extended communities.

Juniper example: target:202945L:70

Sub-Type	ASN	Value	Description
Ingress
`Route Target`	`202945`	`70`	Sets local preference value within AS202945 to `70`.
		`80`	Sets local preference value within AS202945 to `80`.
		`90`	Sets local preference value within AS202945 to `90`.
Egress
`Route Origin`	`202945`	`1000`	Set on routes learned from transit providers.
		`1001`	Set on locally originated GLaNET anycast routes.
		`1002`	Set on routes learned from GLaNET peers.
		`1003`	Set on locally originated routes.
		`1004`	Set on locally originated anycast routes.
		`1005`	Set on routes learned from non-GLaNET peers.